|
Home
|
Polysonics DCT7088
 Features
- Accuracy to ±0.5%
- 0.01 ft/s flow sensitivity
- NEMA6 environmental sealing
- Easy to install, clamp-on design
- Bi-directional flow measurement
- Powerful 40,000 point data logger
- TimeGate diagnostics & wave form analysis Features
- Accuracy to ±0.5% 0.01 ft/s flow sensitivity
- NEMA6 environmental sealing
- Easy to install, clamp-on design
- Bi-directional flow measurement
- Powerful 40,000 point data logger
- TimeGate diagnostics & wave form analysis
The DCT7088 is the world’s most advanced portable transit time
flowmeter. Combining digital signal processing (DSP) with correlation
detection methods, it features exceptional performance and flexibility.
While principally designed for clean liquid applications, the instrument is
tolerant of liquids with higher concentrations of entrained solids or gas
bubbles than was previously possible with transit time technology. The
non-intrusive, clamp-on transducers can be installed without flow
interruption and insure leak-free measurements with zero pressure drop. The
simple menu-driven operation of the DCT7088 allows the meter to be
configured in a fraction of the time necessary for competitive portable
transit time flowmeters
Housed in a rugged NEMA-6 (IP67) enclosure, the DCT7088 is waterproof
against accidental immersion and splashproof with the lid open. The display
is a high resolution, backlit LCD providing excellent visibility, even in
poorly lit conditions. Outputs include a 4-20mA a n a l o g signal and RS232
serial interface. The flowmeter also incorporates a powerful data logger
that can record more than 40,000 data points for subsequent uploading to a
personal computer. A separate memory function stores up to 4 sets of site
parameters, eliminating the requirement to re-enter setup data when
returning to a location for further measurements. .
The DCT7088 can be programmed to start and finish flow measurements at
predetermined times for unattended operation. In addition to password
protection, a padlock can be attached to the instrument enclosure to avoid
any chance of unauthorized tampering. The meter will provide up to 16 hours
of continuous battery operation and can be fully recharged in only 8 hours.
Unlike competitive transit time flowmeters, multiple transducers are not
necessary for different pipe materials and sizes. T h e standard transducer
set is suitable for most plastic, metal and even concrete-lined pipes, and
for diameters from 1 in. (25mm) to 200 in. (5m).
The DCT7088 is available with an impressive array of optional
accessories. The UTG is a compact and rugged, ultrasonic thickness gauge
which allows pipe wall thickness to be quickly determined from the outside
of the pipe. As an instrument separate from the DCT7088, the UTG can be used
for other functions such as measuring the corrosion or erosion of storage
tank walls, etc. To p r o v i dean i m m e d i a t e p a pe r record of
individual flow measurements, logged data and/or site parameters, a small
thermal printer is also available.
|
|
|
Test & Measurement Hire ltd, 16 Swordfish Close, Swordfish Business Park, Burscough, Lancs, L40 8JW
Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager :
Ken Carine
Measurement House, Units 12/13 Harlaw Industrial Estate, Harlaw Way, Inverurie, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager :
Gordon Thow
|
