|
Home
|
SMC 3/TRES 3 ph Relay Test System
Main Features
-
Complete Three-phase system supplied in 2 units
(PTE-300-V/PTE-50-CET).
-
Reversible Outputs (Up to 6 current and 6 Voltage Outputs).
-
Three phase current output 3 x 50A or 3 x 150V.
-
Three phase voltage output 3 x 300V or 3 x 8A.
-
Variable phase angle from 0°-360°, independent in each output
channel.
-
Variable frequency between 40 to 420 Hz.
-
Programmable frequency ramp, with selectable ramp speed
between 0.01 Hz/s. to 10Hz/s.
-
Instantaneous Frequency Step from one value to another.
-
Harmonic Selection, independent in each current phase to the
7th harmonic.
-
Output power is 100 VA in each channel.
-
Fully isolated outputs.
-
Manual Control of all outputs and phase angles, independent in
each channel or linked when making two phase or three phase tests.
-
Fault Simulation can be programmed and achieved manually on
the front panel controls.
-
Capability to perform dynamic and transient tests with a
bandwidth of 0.5 to 5000 Hz.
-
Completely programmable from a computer.
-
Close Case Calibration.
-
Built-in timer with reading in seconds or cycles.
-
3 independent monitors.
-
External phase and frequency reference.
-
Case: IP-65.
-
Portable.
Applications
-
To test all types of three and single phase protection relays.
-
Three and single phase fault simulation.
-
Automatic relay tester, with the EUROTEST software (Not
Supplied).
|
|
|
Test & Measurement Hire ltd, 16 Swordfish Close,
Swordfish Business Park, Burscough, Lancs, L40 8JW
Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager :
Ken Carine
Measurement House, Units 12/13 Harlaw Industrial Estate, Old
Rayne, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager :
Gordon Thow
|
