Test Equipment & Instrumentation, Hire, Sales & Technical Services |
DSM 200A Ductor Tester
|
|
Home
|
DSM 200A Ductor Tester
The DSM200 is a high current microohmmeter suitable for measuring very low
resistances in a wide range of applications. The unit is equally suited to
commissioning, maintenance, and production line environments. Contact
resistances in circuit breakers, switch panels, isolators, and busbar joints
are all easily and safely measured.
The DSM200 is simple to operate, only requiring the user to switch the
output on and set the test current. Selection of all ranges is fully
automatic, and current, voltage and resistance are displayed simultaneously
at all times. The resistance is calculated from the test current and sense
voltage, and there is no need to set an exact test current to guarantee an
accurate test result. To assist the user, all readings are held on the
display when the output is switched off.
Features
- 0-10A
and 0-200A DC test current
- 0.1mW
resolution
- mV,
A, and mW displayed simultaneously
- Direct
Ohms reading at any current
- Large
back-lit liquid crystal display
- Thermal
and over-current protection
- Compact
and portable
- Isolated
RS232 interface for printer or PC
- Triple
supply voltage
- Microprocessor
controlled
 Click
to enlarge specifications
|
|
|
Test & Measurement Hire ltd, 16 Swordfish Close, Swordfish Business Park, Burscough, Lancs, L40 8JW
Phone is 0870 787 0105, Fax is 0870 787 0106
Contact : Hire Manager :
Ken Carine
Measurement House, Units 12/13 Harlaw Industrial Estate, Harlaw Way, Inverurie, Aberdeenshire, AB51 4SG
Phone is 0870 787 0103, Fax is 0870 787 0104
Contact : Area Manager :
Gordon Thow
|
|
|
|
|
| |
