Test Equipment & Instrumentation, Hire, Sales & Technical Services

Two Inch Trimec c/w IS Totaliser

Home

Two Inch Trimec c/w IS Totaliser

Multipulse PD flowmeters utilise the widely accepted oscillating piston design principle in conjunction with modern engineering materials, to provide a cost effective and reliable solution for a wide range of industrial flow measurement applications.

Design Simplicity

Its simple and robust design has the advantage of only one moving part with both high resolution open collector and reed switch outputs as standard.

As each piston rotation passes a known liquid volume, the inherent repeatability of the Multipulse positive displacement flowmeter makes it particularly compatible with batching and dispensing duties.  

Flexibility of Application

Commonly metered liquids range from non-conductive low viscosity solvents through to extremely viscous lubricants, chemicals and food bases.  Application flexibility is further enhanced as meter performance is independent of flow profile eliminating the restrictive need for straight pipe runs required with most alternate metering technologies.

The Multipulse has no stagnate chambers to harbor contaminants. There is no restrictions on mounting orientation and the flowmeter may be operated under vacuum flow, pumped flow or gravity flow conditions

Features

• IP67 (Nema 4X) 316L stainless steel or aluminium construction
• Nominal flow range 120 to 3000 lph (0.5 to 13.2 USGPM)
• Performance independent of flow profile or mounting orientation
• Single moving part
• Pressure to 350 bar (5150 psi)
• Temperature to 150°C (300°F)
• Both open collector and reed switch outputs as standard
• Measures low and high viscosity liquids up to 1,000,000 centipoise
• Adaptable to hygienic applications
• Threaded, flanged or hygienic process connections
• Explosion proof or intrinsically safe operation
• Integral or remote self powered flow rate-totaliser with scaled pulse, analog and flow alarm outputs
• Integral or remote high speed preset batch controller

	Top Of Page
	BACK TO:  Calibration Flowmeters
	To add this site to your favourites click here