Liverpool: T: 01704 896 521
Aberdeen : T: 01467 626 100
In Stock Wide Ranging Stock
Delivery Guaranteed Next Day Delivery
Technical Support 24/7 Technical Support

New Products Added To Our Hire Fleet!

At Test & Measurement we continuously strive to provide the most recent and innovative products for our customers. We have recently added 11 new, world-class products to our hire fleet and are delighted to announce that they are now available for short and long-term hire.

 HVA45TD VLF Tester

As the only hire company in the UK to stock the HVA45TD VL Tester, Test & Measurement can truly cater to our customer's cable testing requirements. The instrument is an ultra-compact and lightweight VLF Test Set with integrated Tan Delta (TD) Diagnostics that is built into a rugged trolley for easy transport and offers outstanding features in terms of size, weight, safety and ease of use. The HVA45TD performs VLF and DC testing, sheath testing, sheath fault location mode and leakage current correction. Assessments of cable condition can also be carried out by the use of Tan Delta Diagnostics. Cable testing according to IEC60502-2:2015, IEEE 400.2-2004, CENELEC HD 620/621, IEEE 400.2-2013 etc.

To find out more click here.

 

Omicron CIBANO 500: 3-in-1 Test System For Voltage Circuit Breakers

A single unit instrument combining a micro-ohmeter, timing analyser and a coil and motor supply, the Omicron Cibano 500 provides the ideal solution for circuit breaker and switch gear testing. To find out more click here. Katronic KF210 Flowmeter The Katronic KF210 Flowmeter is an integrated clamp-on ultrasonic flowmeter that is designed for use in situations where a reliable flow measurement is required, regardless of the conditions. It has been built with advanced battery technology and durable waterproof housing which allows the instrument to be used for long-term installation, even in remote, exposed areas where access to power is limited.

To find out more click here.

 

Baugh & Weedon Pipecheck 2

The Baugh & Weedon Pipecheck 2 water pipe verifier is designed to positively identify pipes that are filled with water. Its user friendly set-up and durable casing allows easy transportation making it the ideal instrument for users working in the water or gas industry. To find out more click here. Seaward 1100V DC Live Line Tester The Seaward 1100V DC Live Line Tester is a voltage detector designed for live line testing on systems up to 1100V DC. It is built with a rugged, high-impact casing and cable. The tester is clearly visible, even in direct sunlight, thanks to the in-built high-intensity red LED indicator lights and polarising feature. This is the ideal instrument to ensure that conductor rails have been isolated from the power supply before maintenance or inspection work takes place on rail track systems.

To find out more click here.

 

Baur PGK 70-2.5 HB AC/DC Test Set

The Baur PGK 70-2.5 HB is a two-part test set designed to generate variable AC test voltages of mains frequency or DC voltages of positive or negative polarity.The high current output from this instrument make it one of the best in the industry! The operating unit in 19" design has a voltage and current display, safety control elements according to VDE-1-4 and variable transformer for voltage adjustment. The high voltage unit contains an oil insulated high voltage transformer and, depending on the operation mode, a rectifier rod or a resistor rod. The polarity of the DC test voltage can be changed by reversing the rectifier in the high voltage unit.

To find out more click here.

 

Bowthorpe Hydraulic Cable Spiker

 

The Bowthorpe Hydraulic Cable Spiker is designed to prove that a selected cable, previously disconnected, was in fact dead before site work commences. With over 25 year's worldwide use, it is the ideal instrument with its silent operation and robust and rigid construction. The kit comprises a hand-operated hydraulic pump that is connected by a fully insulated hose to a hydraulic ram which carries the diamond shaped chisel cable spike. The ram is mounted on a shaped tubular steel body which is located and held around a cable, up to 102mm diameter, by the two threaded steel rods connected to the lower tubular steel base with its cable locating tray.

To find out more click here.

 

DustTrak DRX 8534

The DustTrak DRX is an aerosol monitor designed to simultaneously measure both mass and size fraction - and there is no other monitor out there that can do both! The hand-held monitor is a battery operated, data-logging, light-scattering laser photometer that gives users real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. It is suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites and other outdoor applications. It is capable of measuring aerosol contaminants such as dust, smoke, fumes and mists.

To find out more click here.

 

TSI PH731 Balometer

The TSI PH731 Balometer is a multi-purpose electronic air balancing instrument that is designed for taking direct air volume readings at diffusers and grilles. It features a detachable micro-manometer which can be used with optional probes for increased flexibility in multiple measurement applications. Offering durable, trouble-free operation, this lightweight, ergonomically designed capture hood kit saves time and money by combining multiple measurement tools into one package. The TSI PH731 helps users create a healthy and energy efficient environment whilst meeting local codes, guidelines and regulations for ventilation systems.

To find out more click here.

 

Fluke 6102

The Fluke 6102 Micro-Bath temperature calibrator is designed for use in any location, with any type of sensor including short, square or odd-shaped sensors. By using a fluid bath, this instrument eliminates most fitting or immersion difficulties that users might find when using a dry-block calibrator. The 6102 is stable to ± 0.02 and uniformity is ± 0.02 °C for low uncertainties using a reference thermometer and the display accuracy has been upgraded to ±0.25 °C allowing for quick calibration without a reference thermometer. It is also one of the smallest, and lightest, micro-bath calibrators in the industry!

To find out more click here.

 

Fluke 7103

The Fluke 7103 Micro-Bath temperature calibrator is designed for use in any location, with any type of sensor, including short, square or odd-shaped sensors. By using a fluid bath, this instrument eliminates most fitting or immersion difficulties that users might find when using a dry-block calibrator. Superlative to its previous models, the 7103 is stable to and uniformity is for low uncertainties using a reference thermometer. Display accuracy has also been upgraded to allowing for quick calibration without a reference thermometer. Similar to the Fluke 6102 this is one of the smallest, and lightest, micro-bath calibrators in the industry. To find out more click here.

 

Fluke 1625-2

The Fluke 1625-2 is designed to provide simpler, faster earth ground tests than ever before. The instrument comprises internal memory storage for up to 1500 records, which are accessible via a USB port for rapid data transfer and viewing of results. This instrument also gives the user world-class accessories that take the tedium out of earth ground testing, these include the new wire reels which speed up setup and break down time by as much as 50%. In addition, the heavy duty stakes are able to be hammered into dry or hard soil and the new colour-coded wires ensure that setup is simple and eliminates the risk of mistakes. To find out more click here.

Monday 31st of July 2017

Back to Latest News